Aura photography is one of the most mysterious forms of photography that most people don’t even know about that well. If you are a curious soul and you don’t want to stick with the contemporary style of photography, aura photography might interest you.
Although the concepts are still very blurry, you can think of it as capturing pictures of the auras of an object with your camera. But of course, you can’t just jump right into doing it with just this basic concept.
To help you get a deeper understanding of how does aura photography works, let’s go over everything you need to know about it.
Table of Contents
- 1 Introduction To Aura Photography
- 2 Development
- 3 Setup
- 4 How the AuraCam Works
- 5 How the aura photography work in detail (step by step)
- 5.1 Step 1: Preparing the Photo Plate
- 5.2 Step 2: Placing the Subject on the Plate
- 5.3 Step 3: Connecting the Subject to the Plasma Plate
- 5.4 Step 4: Make Sure Everything is Connected
- 5.5 Step 5: Put it on Insulators
- 5.6 Step 6: Connecting the High Voltage Coil
- 5.7 Step 7: Turing the Power On and Lights Off
- 5.8 Step 8: Taking the Shot
- 6 Radiant Human's Tips For Reading An Aura Photo
- 7 Auras for the home?
- 8 The Great Myth
- 9 The Science
- 10 Experiment
- 11 Conclusion
Introduction To Aura Photography
Aura photography is a mysterious form of photography for most amateur shooters, and even some professionals as well. That’s because the concept is full of myths and different theories that don’t have any scientific backings.
However, it was invented by Semyon Davidovitch Kirlian, and it started to pick popularity from the 1970s. You don’t even need to have any camera to do aural photography, which is the most unique thing about it. It uses a high voltage current on a photographic film to make an exposure using a metal plate, and that would allow you to get the desired photo.
Once you are done with the process, it’s going to show when you develop the film. It’s undoubtedly unlike any other form of photography, and we’ll discuss it further down below.
Once Semyon discovered the concept of aura photography, the next ten years were the time for the development of a machine for it. He and his wife worked to create this high-frequency oscillator or spark generator in easy terms. It was able to operate roughly at 75 kHz, and it’s obviously a revolutionary part of the development phase.
In the early 1960s, this concept started to gain a little popularity as it was published in newspapers and magazines. And then, it kept growing, and you can see what it led up to at this point that we are standing.
At this point, you might be feeling interested and want to start aura photography yourself. But to get started on that, you’d need to get some very specific pieces of equipment. These are not super fancy, and you can easily find it.
First of all, you’d need a plasma photo plate, which should be apparent. Then, you need to get high voltage indicators to use it on that. Also, get a syringe for the electrode plate; you can go with a normal syringe in that case.
You also need to get some electric conductive solution, which is nothing but a simple water and salt solution. Then, get a high voltage spark coil, and a power pulse modulator to power up the whole thing in the process.
Once you’ve gathered all that, it’s time to pick the real object that you are going to photograph, which can be a leaf, for instance. And that will sum up the setup section, and if you have all the equipment, you are good to go for aura photography.
How the AuraCam Works
The Auracam takes the 10-second double exposure and measures the electromagnetic field, which gives a basic reading of the energy channels in the body. You need to know that it’s nothing supernatural about this phenomenon. The energy channels are called Ayurvedic meridians, which are monitored by biofeedback receptors.
From then on, there’s an attached data box that turns these readings into frequencies that are represented by colors. Now, that is pretty straightforward to understand the visual colors at this point.
However, the color key says that red represents joy, orange creative, yellow represents discipline, green is better at healing. Also, the people with a very sensitive mind tend to be blue, and those with higher spirituality glow white, which is pretty amazing if you think about it.
How the aura photography work in detail (step by step)
Now that you’ve all the things you need in place, let’s take a look at a step by step guide on how aura photography works in detail so that you can do it all by yourself.
Step 1: Preparing the Photo Plate
The first thing you need to do is to fill up the plasma photo plate with an electrically conductive solution, which is just a water and salt mixture.
Step 2: Placing the Subject on the Plate
After preparing the plate and making sure that it’s dry and clean, put the subject on the plate. We’ll use a leaf for an example in that case. You also need to know that the higher moisture the subject holds, the final image is going to be much more vibrant as well
Step 3: Connecting the Subject to the Plasma Plate
Use transparent tape to connect the leaf to the plate.
Step 4: Make Sure Everything is Connected
At this point, attach a piece of wire to the subject to the ground, and that’s going to connect it together and make it work.
Step 5: Put it on Insulators
Now that the setup is complete, put it on insulators. Plastic cups work wonderfully in that case as it’s super inexpensive and not easily breakable.
Step 6: Connecting the High Voltage Coil
Connect a high voltage coil to the plasma, and that’s going to finalize the whole setup for you.
Step 7: Turing the Power On and Lights Off
At this stage, you’d need to turn off all the lights in the room and turn on the power.
Step 8: Taking the Shot
This is the final step where you take the picture of the subject. Use the maximum aperture possible to get the best photo shots of the subject in the dark.
Radiant Human's Tips For Reading An Aura Photo
If you want to read aura photos, you need to have a basic idea about colors. First, let’s talk about red. It represents joy in a person, and if you see it in the aura image, it means that the person is very happy in their own skin.
For orange, it’s a bit different than red, and the unique quality of orange is that it represents creativity. When it comes to yellow, it shows discipline in a person. For green, it’s the color of healing.
For the color blue, it tells that the person is super sensitive and loving. When you see the color white, it means that the person is more spiritual.
Auras for the home?
If you know about the Auracam 6000, you know that it’s super expensive, and it costs $10k. That’s not something most people can afford that easily. However, Coggins has developed a cheaper alternative to that.
The WinAura software is the next level of aura photography, and you can do it sitting in your living room. It actually unleashes real-time biofeedback technology, which lets you interact with the aura on your screen, which is incredible. It’s just a matter of time that these will be available for everyone to get at a very cheaper price range.
The Great Myth
It’s no wonder that the aura photoplay has so many myths around it. People believe that the aura is something supernatural and they are surrounded by all the objects with a living aura. Some even believe that some gifted aura raiders can do wonders to the person’s spiritual and physical state.
Some people think that it’s a very accurate way to predict the emotional and physical state, and you can use it to heal any illness as well. These all are myths, of course. Down below, we’ll talk a little more about it.
The science behind aura photography is pretty apparent unlike most people think. What we see glowing in the photograph is a corona plasma discharge, and it’s nothing supernatural. And the humidity, touch of your hand, amount of voltage can impact it, which is going to change up the final image.
There was a famous experiment done on aura photography which involved a leaf slowly dying. The leaf was freshly cut, and pictures were taken showing the glow. But as the leaf started to age, the glow started to reduce slowly. That backs up the life force theory and the aura was spreading the light in these images. So, as the leaf died, the aura started to vanish a little by little.
You just went through a lot of concepts and some detailed discussion on aura photography. Now you should have a good idea about how it works and what you need to get started on aura photography.
It’s undoubtedly one of the most unique types of photography, but as you saw above, it’s nothing supernatural. You can definitely use it to get some of the most magical pictures and add them to your collection. Hopefully, this article helped you with everything you need to know, and you’d be able to do it properly.